8
Yes
None
1
1000000
/ht/broadband-isolation-transformer/
Thumbnail

Categories:

Broadband Isolation Transformer
HVI-TEC 20kV LIU Broadband Isolation Transformer up to VDSL2 and G.fast - up to 280 Mbit/s
HVI-TEC 20kV LIU Broadband Isolation Transformer up to VDSL2 and G.fast - up to 280 Mbit/s Image

HVI-TEC has developed a range of universal broadband transmitters that can protect a range of bandwidths used for voice and data transmission. These are suitable for all POTS up to DSL technologies, including HDSL, HDSL2, SDSL, SHDSL, G.SHDSL, ADSL, ADSL2, ADSL2 +, G.lite-ADSL, VDSL2 and G.fast between 200 Hz and 30 MHz up to 280 Mbit/s.

The universal broadband isolation transformer HVI-TEC-20kV-LIU is used to isolate the incoming telecommunication line from the customer devices in a high voltage environment (HVE). This method represents a physical barrier between customer equipment and the incoming line. This basic insulation protection (HVI) protects people and systems in hazardous areas (ZOI) of power plants, substations, and lightning-prone areas, with an increase in the earth potential (EPR / GPR).

The universal broadband isolation transformers from HVI-TEC are completely passive components and do not require any power supply, which leads to unsurpassed reliability.

The line isolation transformer is to be attached immediately when the communication line is inserted. You can also find additional information and guidelines for the installations in the local regulations.

HVI-TEC 15kV LIU Broadband Isolation Transformer up to ADSL2+ - up to 12 Mbit/s
HVI-TEC 15kV LIU Broadband Isolation Transformer up to ADSL2+ - up to 12 Mbit/s Image

HVI-TEC has developed a range of universal broadband transmitters that can protect a range of bandwidths used for voice and data transmission. These are suitable for all POTS up to DSL technologies, including HDSL, HDSL2, SDSL, SHDSL, G.SHDSL, ADSL, ADSL2 to ADSL2+ from 200 Hz to 3.5 MHz with up to 12 Mbit/s.

The universal broadband isolation transformer HVI-TEC-15kV-LIU is used to isolate the incoming telecommunication line from the customer devices in a high voltage environment (HVE). This method represents a physical barrier between customer equipment and the incoming line. This basic insulation protection (HVI) protects people and systems in hazardous areas (ZOI) of power plants, substations, and lightning-prone areas, with an increase in the earth potential (EPR / GPR).

The universal broadband isolation transformers from HVI-TEC are completely passive components and do not require any power supply, which leads to unsurpassed reliability.

The line isolation transformer is to be attached immediately when the communication line is inserted. You can also find additional information and guidelines for the installations in the local regulations.

HVI-TEC 10kV LIU Broadband Isolation Transformer up to ADSL2+ - up to 10 Mbit/s
HVI-TEC 10kV LIU Broadband Isolation Transformer up to ADSL2+ - up to 10 Mbit/s Image

HVI-TEC has developed a range of universal broadband transmitters that can protect a range of bandwidths used for voice and data transmission. These are suitable for all POTS up to DSL technologies, including ADSL2 from 200 Hz to 3.5 MHz with up to 10 Mbit / s.

The universal broadband isolation transformer HVI-TEC-10kV-LIU is used to isolate the incoming telecommunication line from the customer devices in a high voltage environment (HVE). This method represents a physical barrier between customer equipment and the incoming line. This basic insulation protection (HVI) protects people and systems in hazardous areas (ZOI) of power plants, substations, and lightning-prone areas, with an increase in the earth potential (EPR / GPR) .

The universal broadband isolation transformers from HVI-TEC are completely passive components and do not require any power supply, which leads to unsurpassed reliability.

The line isolation transformer is to be attached immediately when the communication line is inserted. You can also find additional information and guidelines for the installations in the local regulations.

HVI-TEC PCM-FLU 20kV Isolation Transformer - up to 10 Mbit/s
HVI-TEC PCM-FLU 20kV Isolation Transformer - up to 10 Mbit/s Image

HVI-TEC has developed a range of universal broadband transmitters that can protect a range of bandwidths used for voice and data transmission. These are suitable for all POTS up to DSL technologies, including ADSL2 from 200 Hz to 2.0 MHz with up to 10 Mbit / s.

The universal broadband isolation transformer HVI-TEC PCM-FLU 20kV is used to isolate the incoming telecommunication line from the customer devices in a high voltage environment (HVE). This method represents a physical barrier between customer equipment and the incoming line. This basic insulation protection (HVI) protects people and systems in hazardous areas (ZOI) of power plants, substations, and lightning-prone areas, with an increase in the earth potential (EPR / GPR) .

The PCM-FLU isolation transformers from HVI-TEC are completely passive components and do not require any power supply, which leads to unsurpassed reliability.

The line isolation transformer is to be attached immediately when the communication line is inserted. You can also find additional information and guidelines for the installations in the local regulations.

HVI-TEC PCM-FLU 15kV Isolation Transformer - up to 10 Mbit/s
HVI-TEC PCM-FLU 15kV Isolation Transformer - up to 10 Mbit/s Image

HVI-TEC has developed a range of universal broadband transmitters that can protect a range of bandwidths used for voice and data transmission. These are suitable for all POTS up to DSL technologies, including ADSL2 from 200 Hz to 2.0 MHz with up to 10 Mbit / s.

The universal broadband isolation transformer HVI-TEC PCM-FLU 15kV is used to isolate the incoming telecommunication line from the customer devices in a high voltage environment (HVE). This method represents a physical barrier between customer equipment and the incoming line. This basic insulation protection (HVI) protects people and systems in hazardous areas (ZOI) of power plants, substations, and lightning-prone areas, with an increase in the earth potential (EPR / GPR) .

The PCM-FLU isolation transformers from HVI-TEC are completely passive components and do not require any power supply, which leads to unsurpassed reliability.

The line isolation transformer is to be attached immediately when the communication line is inserted. You can also find additional information and guidelines for the installations in the local regulations.

HVI-TEC PCM-FLU 10kV Isolation Transformer - up to 10 Mbit/s
HVI-TEC PCM-FLU 10kV Isolation Transformer - up to 10 Mbit/s Image

HVI-TEC has developed a range of universal broadband transmitters that can protect a range of bandwidths used for voice and data transmission. These are suitable for all POTS up to DSL technologies, including ADSL2 from 200 Hz to 2.0 MHz with up to 10 Mbit / s.

The universal broadband isolation transformer HVI-TEC PCM-FLU 10kV is used to isolate the incoming telecommunication line from the customer devices in a high voltage environment (HVE). This method represents a physical barrier between customer equipment and the incoming line. This basic insulation protection (HVI) protects people and systems in hazardous areas (ZOI) of power plants, substations, and lightning-prone areas, with an increase in the earth potential (EPR / GPR) .

The PCM-FLU isolation transformers from HVI-TEC are completely passive components and do not require any power supply, which leads to unsurpassed reliability.

The line isolation transformer is to be attached immediately when the communication line is inserted. You can also find additional information and guidelines for the installations in the local regulations.

HVI-TEC BBU 20 - 20kV Isolation Transformer - up to 144 kbit/s
HVI-TEC BBU 20 - 20kV Isolation Transformer - up to 144 kbit/s Image

Standard range
The range of our standard transformers conforms to practically the entire spectrum of requirements needing to be met by wired communication systems where sub-elements of a complex system are to be coupled with zero reflection. Available as serial products they are designed for use as either matching or isolating transformers and, depending on the particular model, can be used to create phantom circuits.

Customized specifications
Where special technical requirements are not covered by our range of standard transformers we well be glad to develop transformers based on the customer’s specifications.

System Description
HVI-TEC has been providing high voltage isolation products to protect telecommunications circuits entering substations, power generating plants, cell site communications facilities and PCS sites for over 35 years. With its Isolation Transformer product line, HVI-TEC offers a complete line of copper based high voltage isolation solutions for 10kV (200Hz…3500kHz – 150Ohm), 15kV (200Hz…3500kHz – 150Ohm) and 20kV (200Hz…12MHz – 150Ohm) isolation protection.

The Isolation Transformer is a proven 2-wire passive wire line isolation system, standalone units for high voltage isolation application where equipment and personnel safety are of primary consideration.

The HVI-TEC isolator product line can accommodate virtually every type of communication circuit. The HVI-TEC Isolation Transformer has no moving parts, and does not require cumbersome remote powering arrangements. Its reliability in maintaining communications is unmatched, meeting all the requirements of IEEE 487. HVI-TEC’s passive Isolation Transformer system offers safe, long-term, maintenance-free operation.

HVI-TEC BBU 10 - 10kV Isolation Transformer - up to 144 kbit/s
HVI-TEC BBU 10 - 10kV Isolation Transformer - up to 144 kbit/s Image

Standard range
The range of our standard transformers conforms to practically the entire spectrum of requirements needing to be met by wired communication systems where sub-elements of a complex system are to be coupled with zero reflection. Available as serial products they are designed for use as either matching or isolating transformers and, depending on the particular model, can be used to create phantom circuits.

Customized specifications
Where special technical requirements are not covered by our range of standard transformers we well be glad to develop transformers based on the customer’s specifications.

System Description
HVI-TEC has been providing high voltage isolation products to protect telecommunications circuits entering substations, power generating plants, cell site communications facilities and PCS sites for over 35 years. With its Isolation Transformer product line, HVI-TEC offers a complete line of copper based high voltage isolation solutions for 10kV (200Hz…3500kHz – 150Ohm), 15kV (200Hz…3500kHz – 150Ohm) and 20kV (200Hz…12MHz – 150Ohm) isolation protection.

The Isolation Transformer is a proven 2-wire passive wire line isolation system, standalone units for high voltage isolation application where equipment and personnel safety are of primary consideration.

The HVI-TEC isolator product line can accommodate virtually every type of communication circuit. The HVI-TEC Isolation Transformer has no moving parts, and does not require cumbersome remote powering arrangements. Its reliability in maintaining communications is unmatched, meeting all the requirements of IEEE 487. HVI-TEC’s passive Isolation Transformer system offers safe, long-term, maintenance-free operation.

HVI-TEC BBU 6 - 6kV Isolation Transformer - up to 144 kbit/s
HVI-TEC BBU 6 - 6kV Isolation Transformer - up to 144 kbit/s Image

Standard range
The range of our standard transformers conforms to practically the entire spectrum of requirements needing to be met by wired communication systems where sub-elements of a complex system are to be coupled with zero reflection. Available as serial products they are designed for use as either matching or isolating transformers and, depending on the particular model, can be used to create phantom circuits.

Customized specifications
Where special technical requirements are not covered by our range of standard transformers we well be glad to develop transformers based on the customer’s specifications.

System Description
HVI-TEC has been providing high voltage isolation products to protect telecommunications circuits entering substations, power generating plants, cell site communications facilities and PCS sites for over 35 years. With its Isolation Transformer product line, HVI-TEC offers a complete line of copper based high voltage isolation solutions for 10kV (200Hz…3500kHz – 150Ohm), 15kV (200Hz…3500kHz – 150Ohm) and 20kV (200Hz…12MHz – 150Ohm) isolation protection.

The Isolation Transformer is a proven 2-wire passive wire line isolation system, standalone units for high voltage isolation application where equipment and personnel safety are of primary consideration.

The HVI-TEC isolator product line can accommodate virtually every type of communication circuit. The HVI-TEC Isolation Transformer has no moving parts, and does not require cumbersome remote powering arrangements. Its reliability in maintaining communications is unmatched, meeting all the requirements of IEEE 487. HVI-TEC’s passive Isolation Transformer system offers safe, long-term, maintenance-free operation.

HVI-TEC NFLU 32 - 6kV Isolation Transformer - up to 56 kbit/s
HVI-TEC NFLU 32 - 6kV Isolation Transformer - up to 56 kbit/s Image

Standard range
The range of our standard transformers conforms to practically the entire spectrum of requirements needing to be met by wired communication systems where sub-elements of a complex system are to be coupled with zero reflection. Available as serial products they are designed for use as either matching or isolating transformers and, depending on the particular model, can be used to create phantom circuits.

Customized specifications
Where special technical requirements are not covered by our range of standard transformers we well be glad to develop transformers based on the customer’s specifications.

System Description
HVI-TEC has been providing high voltage isolation products to protect telecommunications circuits entering substations, power generating plants, cell site communications facilities and PCS sites for over 35 years. With its Isolation Transformer product line, HVI-TEC offers a complete line of copper based high voltage isolation solutions for 10kV (200Hz…3500kHz – 150Ohm), 15kV (200Hz…3500kHz – 150Ohm) and 20kV (200Hz…12MHz – 150Ohm) isolation protection.

The Isolation Transformer is a proven 2-wire passive wire line isolation system, standalone units for high voltage isolation application where equipment and personnel safety are of primary consideration.

The HVI-TEC isolator product line can accommodate virtually every type of communication circuit. The HVI-TEC Isolation Transformer has no moving parts, and does not require cumbersome remote powering arrangements. Its reliability in maintaining communications is unmatched, meeting all the requirements of IEEE 487. HVI-TEC’s passive Isolation Transformer system offers safe, long-term, maintenance-free operation.

Broadband Isolation Transformer
HVI-TEC 20kV LIU Broadband Isolation Transformer up to VDSL2 and G.fast - up to 280 Mbit/s Image
HVI-TEC 20kV LIU Broadband Isolation Transformer up to VDSL2 and G.fast - up to 280 Mbit/s
HVI-TEC has developed a range of universal broadband transmitters that can protect a range of bandwidths used for voice and data transmission. These are suitable for all POTS up to DSL technologies, including HDS... Read More
Download: Download datasheet
Download datasheet

DL:
HVI-TEC 15kV LIU Broadband Isolation Transformer up to ADSL2+ - up to 12 Mbit/s Image
HVI-TEC 15kV LIU Broadband Isolation Transformer up to ADSL2+ - up to 12 Mbit/s
HVI-TEC has developed a range of universal broadband transmitters that can protect a range of bandwidths used for voice and data transmission. These are suitable for all POTS up to DSL technologies, including HDS... Read More
Download: Download datasheet
Download datasheet

DL:
HVI-TEC 10kV LIU Broadband Isolation Transformer up to ADSL2+ - up to 10 Mbit/s Image
HVI-TEC 10kV LIU Broadband Isolation Transformer up to ADSL2+ - up to 10 Mbit/s
HVI-TEC has developed a range of universal broadband transmitters that can protect a range of bandwidths used for voice and data transmission. These are suitable for all POTS up to DSL technologies, including ADS... Read More
Download: Download datasheet
Download datasheet

DL:
HVI-TEC PCM-FLU 20kV Isolation Transformer - up to 10 Mbit/s Image
HVI-TEC PCM-FLU 20kV Isolation Transformer - up to 10 Mbit/s
HVI-TEC has developed a range of universal broadband transmitters that can protect a range of bandwidths used for voice and data transmission. These are suitable for all POTS up to DSL technologies, including ADS... Read More
Download: Download datasheet
Download datasheet

DL:
HVI-TEC PCM-FLU 15kV Isolation Transformer - up to 10 Mbit/s Image
HVI-TEC PCM-FLU 15kV Isolation Transformer - up to 10 Mbit/s
HVI-TEC has developed a range of universal broadband transmitters that can protect a range of bandwidths used for voice and data transmission. These are suitable for all POTS up to DSL technologies, including ADS... Read More
Download: Download datasheet
Download datasheet

DL:
HVI-TEC PCM-FLU 10kV Isolation Transformer - up to 10 Mbit/s Image
HVI-TEC PCM-FLU 10kV Isolation Transformer - up to 10 Mbit/s
HVI-TEC has developed a range of universal broadband transmitters that can protect a range of bandwidths used for voice and data transmission. These are suitable for all POTS up to DSL technologies, including ADS... Read More
Download: Download datasheet
Download datasheet

DL:
HVI-TEC BBU 20 - 20kV Isolation Transformer - up to 144 kbit/s Image
HVI-TEC BBU 20 - 20kV Isolation Transformer - up to 144 kbit/s
Standard range The range of our standard transformers conforms to practically the entire spectrum of requirements needing to be met by wired communication systems where sub-elements of a complex system are to be coupled with zero r... Read More
Download: Download datasheet
Download datasheet

DL:
HVI-TEC BBU 10 - 10kV Isolation Transformer - up to 144 kbit/s Image
HVI-TEC BBU 10 - 10kV Isolation Transformer - up to 144 kbit/s
Standard range The range of our standard transformers conforms to practically the entire spectrum of requirements needing to be met by wired communication systems where sub-elements of a complex system are ... Read More
Download: Download datasheet
Download datasheet

DL:
HVI-TEC BBU 6 - 6kV Isolation Transformer - up to 144 kbit/s Image
HVI-TEC BBU 6 - 6kV Isolation Transformer - up to 144 kbit/s
Standard range The range of our standard transformers conforms to practically the entire spectrum of requirements needing to be met by wired communication systems where sub-elements of a complex system are ... Read More
Download: Download datasheet
Download datasheet

DL:
HVI-TEC NFLU 32 - 6kV Isolation Transformer - up to 56 kbit/s Image
HVI-TEC NFLU 32 - 6kV Isolation Transformer - up to 56 kbit/s
Standard range The range of our standard transformers conforms to practically the entire spectrum of requirements needing to be met by wired communication systems where sub-elements of a complex system are ... Read More
Download: Download datasheet
Download datasheet

DL:

HVI-TEC Luescher
Albisriederstrasse 350
CH – 8047 Zurich
Switzerland
+41 44 585 18 00